Review: HD Polish by Greg Gellas of SignatureDetailing

Greg Gellas

Greg Gellas

I'm Greg :)
Today I was able to finally get a chance to correct a car using HD polish and nothing else. This car was scheduled for a 1 step polish and I decided to use HD Polish. I have only done a few test panels with it and didn't know exactly what I was getting into with it :D



Here you can see just above the tail lights the hazing that was all over the entire surface.



DSC_0380_zpsfe53d481.jpg




After HD Polish the hazing is removed. I did not move the camera for this, same shot, same angle.



DSC_0382_zpsf2252df9.jpg




Here you can see the right side of the gas cap is oxidized and hazy, the left side is corrected. All of this correction was acheived using a single pass.



DSC_0379_zpse8c22733.jpg




Unfortunately, this picture didn't come out as well as I like, but you can see how much correction I was able to get with a single pass of HD Polish.



DSC_0400_zps71257c1d.jpg




My complete process was a single pass using HD Polish mated to a LC orange pad on my Rupes LHR15. The level of correction was GREAT, and the gloss was amazing. I probably got 85% correction after a single pass. Removal from the surface was lighting fast, and I noticed NO dust, in fact I went right to a wipe down and sealant. I got more dust from the sealant than I did from HD Polish.



DSC_0428_zpse957508d.jpg




DSC_0431_zps24a58bbc.jpg




DSC_0408_zpsde551a54.jpg




DSC_0442_zps86b28f71.jpg




DSC_0439_zps2f83bf41.jpg




DSC_0421_zps1c33b107.jpg




Thanks for looking...Greg Gellas :)
 
I really like HD polish. Seems to create a very wet look, easy to use, and provides good correction. Used it with a MF pad and was amazed at the results.
 
mrclrider said:
Holy glossy corvette! What was your work time with Polish for your single "pass"
Click to expand...



Total time of polishing was 2.5-3 hours. It was literally, work a small section, wipe, and move on. I wasn't chasing any RIDS, or anything like that. Just a light enhancement polishing. :)
 
Absolutely one of my favorite cars of all time :first:



Looks great, can't wait to give Cut and Polish a try on my Cutlass!
 
how many cars do you think you could do with the 16 oz bottle? i'm trying to decide between the 16 and the 32 oz bottle for my test run.
 
Thanks Guys, HD Polish really was a pleasure to work with.



vdog0531 said:
how many cars do you think you could do with the 16 oz bottle? i'm trying to decide between the 16 and the 32 oz bottle for my test run.
Click to expand...



3 pea sized drops per section worked. Easily you could get 5 cars. I couldn't tell you how much I used on just the 1 car so I can't really say. :o
 
HD Polish is my favorite 3D polish (just got another quart in today), long working time, great cut for the amazing finish, its like a polish and final glaze in one. Works terrific with Optimum's MF cutting and polishing pads. No dust, wipes off easily, water based.



The new top is great too, thanks to 3D for listening. :wavey
 
You must log in or register to reply here.
Back
Top