I need help hard water spots or somethin

9

93v6legend

New member
When i was washin my car the water spots are still there they been there for months and i tired to use vinegar and water mix solution i didn't see any results, it didn't remove any hard water spots. I tried clayin the car it still didn't work. I was hopin if i could use the rubbin compound stuff from advance autopart to see if that works. thanks For the help.
 
I think you will have to do some polishing to remove the spots.



You can remove them by hand with a good hand polish, but it will be 100X easier if you have a PC or rotary.
 
Alright i will try do that with the pc cause it might be a lot easier. is there any other products that could be helpful

Thanks for the help
 
As sixty said, those might be water etchings and they require abrasive polishing. Do be careful, if you do have a '93 Acura Legend then you might have thin paint due to the age of your car. I'm not saying the paint will be thin, but just proceed with extra caution as the elements might have taken its toll.



Also, most rubbing compounds will remove scratches/water etchings with no problem but they tend to leave finer scratches/marring that will need to be polished out by a lesser abrasive product



Removing Water Spots courtesy of the Mayor of Autopia
 
You could try DG water spot remover. It works very well and is not expensive at all. Check out Danase.com for a great deal.
 
You must log in or register to reply here.
Back
Top