Campbell Hausfeld Pressure washers

L

Lone Wolf

New member
Is there any advantage to buffing with the PC after buffing off the wax/polish...For example, say you have just applied a coat of Blitz wax or Zaino....then you remove all the residue with a MF towel..Is there any advantage to then using a MF Bonnet on the PC and going over the whole car again?? Or is this overkill...



Just wondering!!
 
I have dry buffed with a MF bonnet and a spritz of Crystal Mist. I basically did this to get rid of the "Klasse Haze" and it worked great! No more haze and a beautiful shine....



H
 
As long as you already got the residue off with the MF- I don't think there is any advantage. (In fact, it only increases the risk of accidentally encountering some newly-fallen piece of abrasive dust.



I sometimes buff residue off with the PC, but once it is gone I stop. (I would only do this with a microfiber bonnet over a soft foam pad.) I have ALWAYS had BAD results when PC-buffing with anything else, like a terry bonnet.
 
I agree. The PC will help alot if you're trying to remove some hazing from a difficult to use product like Klasse. I'd use a PC to polish out a glaze. But for most everything else hand removal works fine.



As you know you're working in the products so well with the PC that there is almost no product to polish out by hand, let alone PC.
 
You must log in or register to reply here.
Back
Top