PC7424 and Menzerna Help

B

blytes

New member
I recently purchased a PC7424 and need some advice. I have a 02' black nissan se-r spec v with a lot of swirls. I plan to first wash with Meguiars NXT, clay and then riinse. Now comes the PC part. I decided on Menzerna, since people tend to say it is great on black. Should I use Mezerna IP with an orange pad, Menzerna FPII with a white pad, and then the Finishing Touch Glaze with a Red pad? Also, which speeds should I use for each menzerna product?

I read peple saying to ease it in with 3 and then step the PC to 6, but should I do that for all the menzerna steps?



I have:

2 7.5" Lake Counrty Orange Power Pads

2 7.5" Lake Counrty Red Polishing Pads

1 6.5" Lake Counrty White Pad

Menzerna Intensive Polish

Menzerna Final Polish II

Menzerna Finishing Touch Glaze
 
i use the menzerna IP with a yellow cutting pad,

FPII with a white polishing pad and then my sealant / wax with a gray finishing pad,



you can even go from IP to your sealant, I have done this before,

and the most recent time i detailed my camaro, i went from IP to vanilla moose ( glaze ) then to a sealant :getdown
 
When you say sealant, do you mean like a wax? I get a little confused when ppl talk about sealants as opposed to wax. I plan to use the Collinite 845 after I apply the glaze. Is that ok?
 
blytes said:
When you say sealant, do you mean like a wax? I get a little confused when ppl talk about sealants as opposed to wax. I plan to use the Collinite 845 after I apply the glaze. Is that ok?
Click to expand...



i still get confused myself,



sealant - synthetic polymer protectant :o

wax - more along the lines of a carnauba :o



i hope i do not upset the autopian gods :secret



collinite will be fine :2thumbs:
 
You must log in or register to reply here.
Back
Top