PC waxing with #26 liquid

Yes, much easier. Application is much more even and consistent without excessive buildup or wasted product. Removal with a bonnet is effortless . . . no extra buffing or streaking :up
 
I use the PC with #26 all the time- great results. I start it at 2-3 and work the product in some, then go up to 5.5-6 with a Meguiar's finish polishing pad.
 
speed 6 for wax application?! That's really not necessary... Speed 3 will work just fine.



I've also used a finishing pad for applying #26. I found that it was kinda difficult to get all the wax out of the pad though.
 
I almost gave up on #26 liquid at one time, once I tried it with the PC--I was "rehooked." :)



I like to use a finishing pad on 3, removal is *very* easy and the finish is *really* slick (not that that has anything to do with application method).
 
WSUcommuter said:
:buffing: I find that using higher speeds helps me get #26 out of the pad easier for some reason



:nixweiss
Click to expand...



Centrifical/centrifugal forces
 
ebpcivicsi said:
I almost gave up on #26 liquid at one time, once I tried it with the PC--I was "rehooked." :)



I like to use a finishing pad on 3, removal is *very* easy and the finish is *really* slick (not that that has anything to do with application method).
Click to expand...



Do you mist your finishing pad with anything? e.g. water, qd, etc ...
 
You must log in or register to reply here.
Back
Top