Considering using Menzerna IP & FP

[jw]

How are these products. I've got a couple of moderate scratches that i plan to use my pc with the IP. I then plan to do the rest of the car with FP followed by AIO and then P21s. How does that sound? What pads for the PC would you recommend for these products. I would probably get them from CMA.



Thanks

 

[Anthony O.]

Wonderful products:up



Lake Country pads work well for the PC.



Anthony

 

[imported_jgv]

^^^ What Anthony said. And you may skip the AIO as the FP will leave such a nice finish ready to wax

 

[imported_edschwab1]

I can not comment on the M polishes.

JGV,

Can you go from FP to SG or other sealant?



Eric

 

[imported_jgv]

I've done that with UPP and no problem.

 

[DantePasquale]

JW, I have had very good results with IP (PC on 4, yellow pad) and FP (PC again on 4, white pad). Followed that with AIO and SG. If you do not get the finish and shine you are looking for with the IP/FP. try the PC on 5. Just remember, go SLOW with movement of the PC, let it work. Also, taking the IP/FP residue off with 50/50 mix of water and alcohol helps get you a clean surface, so you can accurately see the progress made. Have fun!!!

 

[imported_Terry]

Wonderful products:up



Lake Country pads work well for the PC.



Anthony

Yes sir:xyxthumbs

 

[Dinzdale40]

They are awesome polishes. I love to use them. To remove scratches you might need more power tho. I would also look at menzerna's Power Gloss(supposedly twice as strong as IP and breaks down the same so you only need to follow with FP), which i haven't tried yet but am dying to.

 

[Anthony O.]

You may want to look at this car I detailed and buffed out with a Lake Country pad and Menzerna Powergloss. I used a rotary though as a PC does not have enough umph to level the paint on the cars messed up paint.



Here is the link http://www.autopia.org/forums/showthread.php?s=&threadid=31001



Anthony