Bugatti Veyron Super Sport Detailed

Todd@RUPES

Todd@RUPES

Just a regular guy
page1a1.jpg

page1a2.jpg

page1a3-1.jpg

page1a4.jpg



page2a1.jpg

page2a2.jpg

page2a3.jpg

page2a4.jpg



page3a1.jpg

page3a2-1.jpg

page3a3.jpg

page3a4.jpg



page4a1.jpg

page4a2.jpg

page4a3.jpg

page4a4.jpg



page5a1.jpg

page5a2.jpg

page5a3.jpg

page5a4-1.jpg
 
Final Pictures


a1.jpg

The Bugatti Veyron Super Sport is equipped with 'SS' 20 spoke wheels. This Super Sport's wheels
were finished with a 'Diamond Cut' two-tone and perfected by Bella Macchina.


a2.jpg

The weave of the blue carbon glistened under the reflective finish of the finally polished lacquer.


a3.jpg

The highly polished lacquer and clear weave made the Bugatti appear alive when walked around.


a4.jpg

The gas fill cover, engine vents, and wheels were painted a bespoke blue at the factory and polished by Bella Macchina.


a5.jpg

With a top speed of over 265 miles per hour, the Bugatti's front end is the proverbial 'nuke' to insects all over the world.


a6.jpg

The swirl free sunlight reflections of highly polished and accurate paint.


a7.jpg



a8.jpg



a9.jpg

The underside of the rear wing was polished as well, resulting in the accurate reflection of the hydraulic mechanism that
raises it (when traveling fast or 'armed'.)


a10.jpg

The combination of a highly polished lacquer, carbon blue weave, and an a curvaceous body make the Bugatti Veyron
Super Sport stunning in bright light, at any angel.


a11.jpg



a12.jpg

Chris Schlumpf, of Bugatti USA, a professional photographer as well, sent a couple pictures of the Bugatti after
driving for several days


a13.jpg



a14.jpg



Jet Reception Pictures- Immediately after detailing the Bugatti Veyron, Bryan Burnworth hoped on a plane to return home.
I drove the Bugatti to the Jet Center Reception close bye were it was to be the star of the show.


a15.jpg



a16.jpg



Final Picture-

a17-1.jpg


Special Thanks to:

Bryan Burnworth- Peach State Detail, LLC- for flying down from Georgia, working 11 hours, and getting straight on a plane right after he finished. Up until the last minute we did think Bryan was going to make it. Then he showed up, grabbed the hose, and started spraying.

Mike Pennington from Meguiar's- For recommending me for the job and setting the entire thing up. Thank you for the trust!

Bob Willis- Auto Concierge and Richie Carbone- Richie's Custom Detailing- for volunteering to help out due to the time crunch. Unfortunately the Tampa International Airport was apparently pressuring Bugatti USA about having too many people walking around in a secured area. Irregardless the offer was awesome!
 
Todd,

Ill admit I wasnt familiar with your name. But ive seen this car over and over.

I think it goes without saying that is stunning work you did to a BEAST of a machine.

I want to say I absolutely LOVE your layout with the paint readings/CC diagram and just the overall display of the work is worthy of putting in a catalog. You can tell your level of detail is a bar we should all strive to meet!
 
Todd. That carbon fiber tinted blue is flat out awesome. Very very nice.

Your detailed measurements also ice the cake. How do you get the renderings? It's a great tool!
 
Great car, excellent work! The color is truly stunning. Make no mistake, if people didn't know who you were they will after all those framed pictures. ;)
 
Todd, everytime I see this I drool. Awesome work and so much detail was taken into account throughout. Amazing work!
 
sullysdetailing said:
Great job as always
Click to expand...

Thanks Sully!

vitalcarcare said:
Todd,

Ill admit I wasnt familiar with your name. But ive seen this car over and over.

I think it goes without saying that is stunning work you did to a BEAST of a machine.

I want to say I absolutely LOVE your layout with the paint readings/CC diagram and just the overall display of the work is worthy of putting in a catalog. You can tell your level of detail is a bar we should all strive to meet!
Click to expand...

Thank you so much for the compliments; they are truly humbling! I try to set the bar for myself when I have time (which isn't always possible due to having way to much on my plate and being a family guy). Thank you for the appreciation!

Concours.John said:
Todd. That carbon fiber tinted blue is flat out awesome. Very very nice.

Your detailed measurements also ice the cake. How do you get the renderings? It's a great tool!
Click to expand...

Thank you John. I built the renderings on Photoshop.

Pats300zx said:
Amazing work as always Todd.
Click to expand...

Thanks Pat!

GearHead_1 said:
Great car, excellent work! The color is truly stunning. Make no mistake, if people didn't know who you were they will after all those framed pictures. ;)
Click to expand...

Thanks GearHead!

sullysdetailing said:
Todd What program are you using to make those flyer/pictures?
Click to expand...

I am using Photoshop CS4

Rocket said:
Todd, everytime I see this I drool. Awesome work and so much detail was taken into account throughout. Amazing work!
Click to expand...

Thank you Rocket!

Shiny Lil Detlr said:
Man, I've got to work on my Photoshop skills.
Click to expand...

Thanks Charlie!

TroyScherer said:
Amazing work Todd!!!
Click to expand...

Thank you very much Troy!
 
I had to look at this amazing piece on the big screen computer. When looking at the measurements I noticed a .5 mil change. It is at the left wheel hip about 10 to 11 o'clock.
What kind of defect did you have to fix? Just curious.
Great work on an amazing sculpture of rolling art!
 
Concours.John said:
I had to look at this amazing piece on the big screen computer. When looking at the measurements I noticed a .5 mil change. It is at the left wheel hip about 10 to 11 o'clock.
What kind of defect did you have to fix? Just curious.
Great work on an amazing sculpture of rolling art!
Click to expand...

To be honest I seriously doubt we came close to removing anywhere near .5 mils of paint in any spot. With paint measurements, moving the gauge even 1 cm can result in a huge measurement change since the adjacent area can have more or less paint then the area that you originally measured. However I wanted to be as honest as possible with the readings but include the disclaimer that 'paint readings are for general reference only'.
 
Todd Helme said:
To be honest I seriously doubt we came close to removing anywhere near .5 mils of paint in any spot. With paint measurements, moving the gauge even 1 cm can result in a huge measurement change since the adjacent area can have more or less paint then the area that you originally measured. However I wanted to be as honest as possible with the readings but include the disclaimer that 'paint readings are for general reference only'.
Click to expand...

That makes total sense. Without measuring out each location it would be hard to hit the exact same spot.
Thanks.
 
Hey Todd, I just noticed that it looks like one of your pics is an incomplete render:

a3.jpg


Thought I'd point that out in case you missed it -- with the level of perfection you achieved with the car I'm sure you want to equal that level of perfection in your thread! :)
 
Shiny Lil Detlr said:
Hey Todd, I just noticed that it looks like one of your pics is an incomplete render:


Thought I'd point that out in case you missed it -- with the level of perfection you achieved with the car I'm sure you want to equal that level of perfection in your thread! :)
Click to expand...

Thanks Charlie. I think it didn't load into photobucket correctly.

Mr. Gloss said:
Amazing work on a stunning automobile.

I was expecting to see an ONR wash.:rofl
Click to expand...

Thanks.
 
You must log in or register to reply here.
Back
Top