Heavilly Modded WRX... 56k maybe

3

317indy

New member
Process...



Exterior :

NXT Wash

Clay Magic

MXT Wash

# 83 via Yellow & PC

# 80 via Yellow & PC

# 9 Via Yellow & PC

NXT Paste via Hand



Interior :

Woolite-Oxyclean Mix

NXT Protectant

Evercoat Glaze on DoorJams

NXT Paste on DoorJams



Engine :

Grease Lightning

NXT Wash

Clay Magic

NXT Wash

Mothers Metal Polish

Brass Brush to Metal Castings



Before Washing :dance



6._002.jpg




During Claybar :scared:



6._016.jpg


6._019.jpg




After Washing and Claybar-ing



6._027.jpg




Engine After. Sorry No Before shots :-(



6._041.jpg
 
Process...



Exterior :

NXT Wash

Clay Magic

MXT Wash

# 83 via Yellow & PC

# 80 via Yellow & PC

# 9 Via Yellow & PC

NXT Paste via Hand



Interior :

Woolite-Oxyclean Mix

NXT Protectant

Evercoat Glaze on DoorJams

NXT Paste on DoorJams



Engine :

Grease Lightning

NXT Wash

Clay Magic

NXT Wash

Mothers Metal Polish

Brass Brush to Metal Castings



Before Washing :dance



6._002.jpg




During Claybar :scared:



6._016.jpg


6._019.jpg




After Washing and Claybar-ing



6._027.jpg




Engine After. Sorry No Before shots :-(



6._041.jpg
 
Here is a list of all of the performance upgrades and visual modifications that I have done.



Performance

Main Assembly

- JDM Version 7 STi Block

- JDM Version 7 STi Heads



Intake Components

- AEM Short Ram Intake

- Perrin Silicone Turbo Inlet

- Forced Performance “Green� Turbocharger

- Turbo XS / Hyperflow Front Mount Intercooler

- Tial Sport Blow Off Valve

- NextGear, Inc. Thermoshield Gaskets

- Helix Oil Catch Can



Cooling Components

- Samco Silicone Upper Radiator Hose

- Samco Silicone Lower Radiator Hose

- C&R Aluminum Radiator

- Crucial Racing Systems 160* CoolSafe Thermostat

- Crucial Racing Systems 1.4 Bar Radiator Cap

- Redline Water Wetter

- 2004 USDM Version 8 STi Intercooler Water Sprayer



Exhaust Components

- Topspeed Header

- Turbo XS Cast Up-pipe

- RS*R Downpipe

- RS*R ExMag GT2 Cat-back

- DEI Heat Wrap



Transmission Components

- STi RA Gearset

- Exedy Twin Plate Clutch w/ Flywheel

- Kartboy Short Shifter

- Kartboy Shifter Bushings



Fueling Components

- Perrin Aluminum Fuel Rails

- Walbro 255lph Fuel Pump

- Modified Stock Injectors

- SMC Enterprises Alcohol Injection Kit



Electronics

Gauges

- GReddy 52mm Electronic Boost Gauge

- GReddy 52mm Electronic EGT Gauge

- GReddy 52mm Electronic Oil Temp Gauge

- GReddy 52mm Electronic Oil Pressure Gauge

- GReddy 52mm Electronic Fuel Pressure Gauge

- 2004 USDM Version 8 STi Gauge Cluster



Turbo Components

- Blitz SBC-iD III Electronic Boost Controller

- HKS Type-0 Turbo Timer



Tuning

- Hydra Stand Alone Engine Management System

- Hydra Wideband O2 Sensor



Audio / Visual

- Pioneer AVIC-N1 Head Unit with CD/DVD/Navigation

- Rockford Fosgate 5.25" 2-Way Front Components



Miscellaneous Components

- Braille 11.5 Pound Lightweight Battery



Interior

- 2004 USDM Version 8 STi Door Panels

- 2004 USDM Version 8 STi Front Seats

- 2004 USDM Version 8 STi Rear Seats

- 2004 USDM Version 8 STi E-Brake Handle

- 2004 USDM Version 8 STi Steering Wheel

- Sparco 2" 3-point Racing Harnesses

- Autometer A-Pillar Dual Gauge Pod

- Autometer Dual Gauge Bezel Pod

- Custom Vent Gauge Pod

- Kartboy Knuckle Ball shift knob



Aesthetics

Lighting

- JDM STi Projector Headlamps

- Lamin-X Yellow Fog Light Protective Film

- Carbon Fiber STi Sidemarkers



Body

- Seibon Carbon Fiber GReddy Front Lip

- Seibon Carbon Fiber CWest Rear Lip

- Seibon Carbon Fiber Cusco Hood

- Seibon Carbon Fiber Aqua Reverse Hood Scoop

- Topseed STi Grill

- JDM STi Electronic Folding Mirrors



Engine Compartment

- LNR Carbon Fiber Alternator Cover

- LNR Carbon Fiber Boost Solenoid Cover

- LNR Carbon Fiber Oil Cap

- APR Carbon Fiber Radiator Cooling Plate



Suspension / Tyres

Suspension Components

- Tanabe DF210 Coilovers

- Cusco Aluminum Front Strut Tower Bar

- Cusco Aluminum Rear Strut Tower Bar



Rims / Tyres

- 5Zigen 18x7.5 Bronze FN01R-C Rims

- Toyo Proxes RA-1 tyres in 225/40zr/18

- 5Zigen Aluminum Race Lugnuts



Brakes

- Stoptech Big Brake Kit in the front

- Stoptech Stainless Steel Braided Lines in the front
 
Here is a list of all of the performance upgrades and visual modifications that I have done.



Performance

Main Assembly

- JDM Version 7 STi Block

- JDM Version 7 STi Heads



Intake Components

- AEM Short Ram Intake

- Perrin Silicone Turbo Inlet

- Forced Performance “Green� Turbocharger

- Turbo XS / Hyperflow Front Mount Intercooler

- Tial Sport Blow Off Valve

- NextGear, Inc. Thermoshield Gaskets

- Helix Oil Catch Can



Cooling Components

- Samco Silicone Upper Radiator Hose

- Samco Silicone Lower Radiator Hose

- C&R Aluminum Radiator

- Crucial Racing Systems 160* CoolSafe Thermostat

- Crucial Racing Systems 1.4 Bar Radiator Cap

- Redline Water Wetter

- 2004 USDM Version 8 STi Intercooler Water Sprayer



Exhaust Components

- Topspeed Header

- Turbo XS Cast Up-pipe

- RS*R Downpipe

- RS*R ExMag GT2 Cat-back

- DEI Heat Wrap



Transmission Components

- STi RA Gearset

- Exedy Twin Plate Clutch w/ Flywheel

- Kartboy Short Shifter

- Kartboy Shifter Bushings



Fueling Components

- Perrin Aluminum Fuel Rails

- Walbro 255lph Fuel Pump

- Modified Stock Injectors

- SMC Enterprises Alcohol Injection Kit



Electronics

Gauges

- GReddy 52mm Electronic Boost Gauge

- GReddy 52mm Electronic EGT Gauge

- GReddy 52mm Electronic Oil Temp Gauge

- GReddy 52mm Electronic Oil Pressure Gauge

- GReddy 52mm Electronic Fuel Pressure Gauge

- 2004 USDM Version 8 STi Gauge Cluster



Turbo Components

- Blitz SBC-iD III Electronic Boost Controller

- HKS Type-0 Turbo Timer



Tuning

- Hydra Stand Alone Engine Management System

- Hydra Wideband O2 Sensor



Audio / Visual

- Pioneer AVIC-N1 Head Unit with CD/DVD/Navigation

- Rockford Fosgate 5.25" 2-Way Front Components



Miscellaneous Components

- Braille 11.5 Pound Lightweight Battery



Interior

- 2004 USDM Version 8 STi Door Panels

- 2004 USDM Version 8 STi Front Seats

- 2004 USDM Version 8 STi Rear Seats

- 2004 USDM Version 8 STi E-Brake Handle

- 2004 USDM Version 8 STi Steering Wheel

- Sparco 2" 3-point Racing Harnesses

- Autometer A-Pillar Dual Gauge Pod

- Autometer Dual Gauge Bezel Pod

- Custom Vent Gauge Pod

- Kartboy Knuckle Ball shift knob



Aesthetics

Lighting

- JDM STi Projector Headlamps

- Lamin-X Yellow Fog Light Protective Film

- Carbon Fiber STi Sidemarkers



Body

- Seibon Carbon Fiber GReddy Front Lip

- Seibon Carbon Fiber CWest Rear Lip

- Seibon Carbon Fiber Cusco Hood

- Seibon Carbon Fiber Aqua Reverse Hood Scoop

- Topseed STi Grill

- JDM STi Electronic Folding Mirrors



Engine Compartment

- LNR Carbon Fiber Alternator Cover

- LNR Carbon Fiber Boost Solenoid Cover

- LNR Carbon Fiber Oil Cap

- APR Carbon Fiber Radiator Cooling Plate



Suspension / Tyres

Suspension Components

- Tanabe DF210 Coilovers

- Cusco Aluminum Front Strut Tower Bar

- Cusco Aluminum Rear Strut Tower Bar



Rims / Tyres

- 5Zigen 18x7.5 Bronze FN01R-C Rims

- Toyo Proxes RA-1 tyres in 225/40zr/18

- 5Zigen Aluminum Race Lugnuts



Brakes

- Stoptech Big Brake Kit in the front

- Stoptech Stainless Steel Braided Lines in the front
 
hadboosttroy said:
how was the quality of the seibon stuff? those arent 5 zigen rims by the way
Click to expand...





All of the carbon fiber was quality product. His 5Ziegen(sp) are currently getting powdercoated gloss black. There is a big car show coming up soon and he wanted it done in time for it. Its Import and Truck Bash. Yes it get a lot of track time. He put 370ish awdhp Im due to detail his brothers WRX which is even faster than his... :LOLOL I believe his best time is 12.2 or something. His brothers car just recently got put together...



http://www.cardomain.com/ride/239517 <~ thats his brothers old cardomain site... He now has a pretty big turbo GT35R and fully built motor... Ill be sure to post pics of his brothers detail as well. :xyxthumbs
 
hadboosttroy said:
how was the quality of the seibon stuff? those arent 5 zigen rims by the way
Click to expand...





All of the carbon fiber was quality product. His 5Ziegen(sp) are currently getting powdercoated gloss black. There is a big car show coming up soon and he wanted it done in time for it. Its Import and Truck Bash. Yes it get a lot of track time. He put 370ish awdhp Im due to detail his brothers WRX which is even faster than his... :LOLOL I believe his best time is 12.2 or something. His brothers car just recently got put together...



http://www.cardomain.com/ride/239517 <~ thats his brothers old cardomain site... He now has a pretty big turbo GT35R and fully built motor... Ill be sure to post pics of his brothers detail as well. :xyxthumbs
 
You must log in or register to reply here.
Back
Top