Well I finally got a chance to detail my own car for the first time with the PC. The swirls didn't appear to be that deep so I thought I'd be able to get them out without any issues. I made several passes with SSR 2.5, which helped a little, but still didn't knock them out. Tried SSR 1 on a few spots just to see if that helped, which didn't really. So, I've got some more toying to do to figure this out.
Sorry for the crappy pics, the sun was going down and I didn't have much time. Try to get some full sun shots tomorrow. Also, feel free to throw out some suggestions on tackling my swirls. When I started I misted the pad with FK #425 and placed an X on the pad, then after the initial "prime" I used four dime-sized dots of polish starting at 3 to spread it around then bumped it up to 5-6 adding some pressure and moving about an inch per second.
Process:
Wash with NXT
Clay with Clay Magic
SSR2.5 via Green Propel 2 ( wasn't enough)
SSR2.5 via Orange x2
AIO
PB EX-P
Tires were dressed with EO Tire Shine
Glass received NXT Glass Cleaner
BEFORE: (very few)
Sorry for the crappy pics, the sun was going down and I didn't have much time. Try to get some full sun shots tomorrow. Also, feel free to throw out some suggestions on tackling my swirls. When I started I misted the pad with FK #425 and placed an X on the pad, then after the initial "prime" I used four dime-sized dots of polish starting at 3 to spread it around then bumped it up to 5-6 adding some pressure and moving about an inch per second.
Process:
Wash with NXT
Clay with Clay Magic
SSR2.5 via Green Propel 2 ( wasn't enough)
SSR2.5 via Orange x2
AIO
PB EX-P
Tires were dressed with EO Tire Shine
Glass received NXT Glass Cleaner
BEFORE: (very few)
